Friday, April 12, 2013

Mobile Tricks


On the main screen type in:

*#06#
for checking the IMEI
(International Mobile Equipment Identity).

*#7780#
Reset to factory settings.

*#67705646#
This will clear the LCD display(operator logo).

*#0000#
To view software version.

*#2820#
Bluetooth device address.

*#746025625#
Sim clock allowed status.

#pw+1234567890+1#
Shows if sim have restrictions.

*#92702689# -
Takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# -
Enhanced Full Rate Codec (EFR) activation.
Increase signal strength, better signal reception.
It also help if u want to use GPRS
and the service is not responding or too slow.
Phone battery will drain faster though.

*#3370* -
(EFR) deactivation.
Phone will automatically restart.
Increase battery life by 30% because
phone receives less signal from network.

*#4720# -
Half Rate Codec activation.

*#4720* -
Half Rate Codec deactivation.
The phone will automatically restart
If you forgot wallet code for Nokia S60 phone,
use this code reset:
*#7370925538#



Note, your data in the wallet will be erased.
Phone will ask you the lock code.
Default lock code is: 12345

Press
*#3925538#
to delete the contents and code of wallet.

Unlock service provider: Insert sim,
turn phone on and press vol up(arrow keys) for 3 seconds,
should say pin code. Press C,
then press * message should flash,
press * again and 04*pin*pin*pin# \

*#7328748263373738#
resets security code.

Default security code is 12345

Change closed caller group
(settings >security settings>user groups)
to 00000 and ure phone will sound the message tone
when you are near a radar speed trap.
Setting it to 500 will cause your phone 2 set off
security alarms at shop exits, gr8 for practical jokes!
(works with some of the Nokia phones.)
Press and hold "0" on the main screen to open wap browser.




Code Function
*3370#
Activate Enhanced Full Rate Codec (EFR) -
Your phone uses the best sound quality
but talk time is reduced my approx. 5%


#3370#
Deactivate Enhanced Full Rate Codec (EFR)


*#4720#
Activate Half Rate Codec -
Your phone uses a lower quality sound
but you should gain approx 30% more Talk Time


*#4720#
Deactivate Half Rate Codec

#pw+1234567890+1#
Provider Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)


#pw+1234567890+2#
Network Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)


#pw+1234567890+3#
Country Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)


#pw+1234567890+4#
SIM Card Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)


12345 This is the default security code

 



*#21#
Allows you to check the number
that “All Calls” are diverted to
*#30#
Lets you see the private number
*#43#
Allows you to check the
“Call Waiting” status of your phone.
*#61#
Allows you to check the number that
“On No Reply” calls are diverted to
*#62#
Allows you to check the number that
“Divert If Unreachable (no service)” calls are diverted to
*#67#
Allows you to check the number that
“On Busy Calls” are diverted to

*#0000#
Displays your phones software version,
1st Line : Software Version,
2nd Line : Software Release Date,
3rd Line : Compression Type
*#9999#
Phones software version if
*#0000# does not work
*#06#
For checking the International Mobile Equipment Identity (IMEI Number)






*#73#
Reset phone timers and game scores


*#746025625#
Displays the SIM Clock status,
if your phone supports this power saving feature
“SIM Clock Stop Allowed",
it means you will get the best standby time possible


*#94870345123456789#
Deactivate the PWM-Mem
press and hold # Lets you switch between lines


*#7760#
Manufacturers code


*#7780#
Restore factory settings


*#8110#
Software version for the nokia 8110


*#92702689#
Displays -
1.Serial Number,
2.Date Made,
3.Purchase Date,
4.Date of last repair
(0000 for no repairs),
5.Transfer User Data.
To exit this mode you need
to switch your phone off then on again




Here is a trick to get a call to your cell phone


Here is a trick to get a call to your cell phone from your own number. Do you think I am crazy? No, I am not  .

Just try the following steps and you ll get a call to your cell phone from your own number.



1. Just give a missed call to this number. You ll not be charged!
+41445804650

2. Wait for a few seconds and you ll get a call to your cell phone from your own number

3. Receive the call.You ll hear a lady voice asking for a PIN number. Just enter some rubbish number.

4. She say s- Your PIN cannot be processed and the call disconnects........

ANOTHER TRICK

Instead of giving a missed call, just continue calling. The call will not be received and will get disconnected just after a while. But now do you know what happen s?

You will get a call from the number
+501
Reason behind this trick

God Knows!!


MOBILE HACKs
---

Reset Nokia's Security code to 12345.

You will need a card reader to perform this operation.

1) Remove memory card from your locked Nokia mobile phone.

2) Put your card into card reader and connect it with your computer. Create
the directory System\Recogs and copy thc-nokia-unlock.mdl into this directory. So at the end your file will be in System/recogs directory of your mmc.

3) Remove the Memory Card and place it into the locked phone.

4) Now start your locked phone and wait for some time when it asks for the code. Let this tool reset the code for you. Wait for 2 minutes and then enter 12345 in the code box.

5) Done. Your security code will be reset to 12345.



This method is tested on Nokia N72 and it’s 100% working.

DOWNLOAD NOKIA THC UNLOCK (1 KB)(.mdl file)(RS)

http://rapidshare.com/files/176305922/THC-NOKIA-UNLOCK.rar



Increase mobile speed

this is only for those users which have memory card in their PHONES
first of all you will need
-computer
-usb connectivity of MEMORY CARD TO PC(CARD READER) NOT BLUETOOTH
follow these steps:-
1.remove memory card from mobile.

2.insert it in CARD READER.

3.OPEN start menu>All program>acceSSories>system tools>DISK DEFRAGMENTER

4.Just run defragmenter at your memory card.

5.FRAGMENT IT 2 OR 3 TIMES.

6.PUT back memory card to phone.

7.ENJOY THE "SPEED."

No comments:

Post a Comment